Installation & Troubleshooting
Downloads
Installation
Important Notes
An electrical outlet on a minimum 15A Circuit is required.
If using an extension cord, use only those that are three-prong grounded and rated for 15A.
Pre-Installation
![](/file/general/Step_6B-20230418-204316.png)
1. Locate your shut-off valve and turn off the water supply.
![](/file/general/Step_5_A-A-20230418-204311.png)
2. Drain the tank by flushing the toilet.
![](/file/general/Step_00_v3-20230418-204241.png)
3. Place a towel on the floor, under the supply line connector.
![](/file/general/Step_5B-A-20230418-204309.png)
4. Remove the old supply line connector.
Installation
If you have a question that is not answered above, please reach out to our support team.